Buy now with PayPal

phone: 01706 521074 e-mail: sales@gapswater.co.uk

Duplex Water Softener with Clack WS1.5 Digital METER Controller, 1.5"

Duplex Water Softener with Clack WS1.5  Digital METER Controller, 1.5
Duplex Water Softener with Clack WS1.5  Digital METER Controller, 1.5" - view 1Duplex Water Softener with Clack WS1.5  Digital METER Controller, 1.5" - view 2

1.5" in/out connections

Duplex water softeners consist of two vessels filled with softening resin. In normal use one vessel is online (duty) while the other is off line (standby).

Systems range in size from 500 l/ per hour to 50,000 litres per hour

All systems come with vessels, valves, resins, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank.

Duplex softeners normally regenerate when the duty vessel becomes saturated with scale. The standby tank immediately goes online while the previous online tank regenerates. When sizing a duplex system softeners are normally sized to go 12 hours between needing to regenerate.

This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

*total weight of the unit without water or filled brine tank
**sizes may vary dependant on components used and should only be used as a guide.

1.5" in/out connections

Duplex water softeners consist of two vessels filled with softening resin. In normal use one vessel is online (duty) while the other is off line (standby).

Systems range in size from 500 l/ per hour to 50,000 litres per hour

All systems come with vessels, valves, resins, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank.

Duplex softeners normally regenerate when the duty vessel becomes saturated with scale. The standby tank immediately goes online while the previous online tank regenerates. When sizing a duplex system softeners are normally sized to go 12 hours between needing to regenerate.

This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

*total weight of the unit without water or filled brine tank
**sizes may vary dependant on components used and should only be used as a guide.
General conditions for installation

Connection IN & OUT: 1.5"
Drain connection(*): 3/4", 1" or 1.25" dependent on flow
Electrical rating: 230V 50Hz 12V Transformer
Max power rating: 6W
IP protection class: Double isolated transformer
Minimum inlet pressure: 200 kPa (2 bar)
Maximum inlet pressure: 600 kPa (6 bar)
Vacuum: no allowance
Average pressure loss (**): 100 kPa (1 bar)
Min-max water temperature: 5-35°C

Remarks
(*) Dependant on Drain line flow control.
(**) Under normal circumstances.
It is always recommended to install a 25 micron cartridge filter before a softener.

Resin

Type: Strong acid cation resin - softening ,food grade quality
Life span: 15 years under normal circumstances

Ion exchange ( for average salt consumption of 150 g/L )


oops

Regeneration

Start: Default Time 2:00 am, set on the timer as ( delayed regeneration )
Options: TIME - VOLUME - IMMEDIATE - DELAYED - DAYS OVERRIDE and manual regeneration.

oops
Remarks
The interval between regenerations should not be more than 14 days, to prevent bacteria growth.

Flow Rate

oops

Consumption of Rinse Water

oops

Recently Viewed